about-us
design-flaws-considerations
Jul12
Written by: Gary Bizek

All construction projects, residential or commercial, are unique. If you have been in the industry for long, you can notice many design issues repeated time and again. Such design flaws should be identified early in the design and planning phase and resolved to eliminate or reduce costs. Most of these issues are easy to address....

July 12, 2018

virtual-reality
Jun28
Written by: Gary Bizek

Construction has benefitted from the use of advanced technology like robotics, virtual reality, and augmented reality in more ways than one. In fact today the use of virtual reality in the construction industry has become so popular that almost all aspects of the same is being positively impacted by the immersive experience of virtual reality....

June 28, 2018

construction-trends
Jun21
Written by: Gary Bizek

It is common knowledge that the construction industry was quite laid back in its adoption of the latest technological innovations that the other industries were already benefiting from. Today, however, with the complex and elaborate construction processes becoming simpler, the pace of implementation of these technologies has increased considerably....

June 21, 2018

benefit_construction_management
Jun07
Written by: Gary Bizek

Even though there is a lot that needs to be done to achieve the complete digitisation of the construction industry, the fact that there is a growing demand for construction management software shows that the industry is well on its way to achieve the same. This software with its features specifically meant for the construction … Continue reading 7 Important Benefits Of The Use Of Construction Management Software...

June 7, 2018

Drones_construction_efficiency
May31
Written by: Gary Bizek

The profitability of any and every construction company is basically based on three very important or critical factors. They are: Time which decides the total schedule of the project and also plays a role in determining the total cost, The total cost that a company will have to bear in order to take a construction … Continue reading Using Drones To Increase Construction Management Efficiency...

May 31, 2018

trend_construction_management
May17
Written by: Gary Bizek

The construction industry has undergone a number of changes in the last few decades both in terms of its planning and execution. But these growing trends and changing concepts have also resulted in a constant stream of dynamic changes which need to be incorporated in the construction management software so as to enable it to … Continue reading Evolving Trends Of Construction Management Software For Year 2018...

May 17, 2018

offsite-conscrution
Apr27
Written by: Gary Bizek

The buzz-word of the construction industry today is off-site construction. This is a concept which helps to plan, design, fabricate and assemble building elements at a location which is far removed from the final construction site....

April 27, 2018

constcution
Apr19
Written by: Gary Bizek

Exterior walls in commercial buildings can be finished with different types of materials. Choosing the right exterior wall finishes and materials can go beyond increasing savings and protect your building against extreme weather conditions and fire....

April 19, 2018

eco-friendly-construction
Apr12
Written by: Gary Bizek

The awareness about the bleak future the human race is slated to face if certain environmental concerns are not addressed, is definitely on the rise. Thus today people genuinely think about doing their bit to save the environment and thus the world. In the construction industry, there is a lot that can be done....

April 12, 2018

cons
Apr06
Written by: Gary Bizek

With tough competition prevalent even in the construction industry, it becomes necessary for businesses to adopt good strategies for advertising their skills and expertise....

April 6, 2018

project-stretagy
Mar29
Written by: Gary Bizek

Planning is, perhaps, the most important technique of construction project management. It lays the foundation of any construction project management and can be effectively done by following certain established practices and using certain standardised tools....

March 29, 2018

Construction Management
Mar21
Written by: Gary Bizek

Irrespective of their sizes, businesses involved in the construction have to necessarily manage construction projects on their own. In order for them to be successful, they need to have proper techniques for planning, co-ordination, budgeting, scheduling etc...

March 21, 2018

Mar15
Written by: Gary Bizek

The building and construction industry requires a lot of meticulous planning, precise execution and constant monitoring so that it can function properly. Right from the initiation of a project to its end, the execution of a building project is not just one process....

March 15, 2018

Mar07
Written by: Gary Bizek

Check out our customer feedback and find out why our customers love us!...

March 7, 2018

constrution
Feb28
Written by: Gary Bizek

Building Information Modelling or BIM, as it is popularly known as, is the process by which a building’s features can be digitally developed. This model, once created,...

February 28, 2018

iot-construction
Feb21
Written by: Gary Bizek

While there is a lot of talk with regards to the IoT or Internet of Things, few of us really know what it does or does not do and what effect it has on the construction and building industry. The possibilities and applications of this technology is extremely vast....

February 21, 2018

Feb01
Written by: Gary Bizek

Check out our customer feedback and find out why our customers love us!...

February 1, 2018

Jan25
Written by: Gary Bizek

Exterior walls in commercial buildings can be finished with different types of materials. Choosing the right exterior wall finishes and materials can go beyond increasing savings and protect your building against extreme weather conditions and fire....

January 25, 2018

construction safety tips
Jan18
Written by: Gary Bizek

Safety has become the most important concern in construction jobsites. It is still a challenge for construction companies to create an accident-free environment. Adopting the right technologies and innovations can prove to be valuable assets in achieving this goal....

January 18, 2018

construction calgary
Jan04
Written by: Gary Bizek

There are many reasons for the increase in use of cross-laminated timber in construction projects. It is lightweight yet strong and offers many other technical advantages over various types of construction materials....

January 4, 2018

Dec28
Written by: Gary Bizek

Precast concrete finds widespread application in different types of construction projects. It is a cost effective, alternative material to conventional options. The material offers the perfect combination of durability, control, safety, speed and cost savings....

December 28, 2017

desingn and Construction
Dec21
Written by: Gary Bizek

There are many advantages of choosing the design-build construction concept for your projects. It helps in reducing costs and saving time and resources while helping you get the most out of the available resources....

December 21, 2017

Dec14
Written by: Gary Bizek

The construction industry has begun embracing the benefits of computer-aided manufacturing (CAM) to address different areas. The benefits of prefabrication and Lean construction have already been realized....

December 14, 2017

commercial contractor
Dec07
Written by: Gary Bizek

When it comes to constructing a building, it is imperative to have a sturdy groundwork. The complete weight of the building is going to rely on its foundation. Groundwork is crucial to the success of any construction project....

December 7, 2017

construction_budget_calgary
Nov30
Written by: Gary Bizek

When it comes to keeping commercial construction costs low, it is important to choose the right general contractor. Proper planning is another important factor that affects your project’s costs....

November 30, 2017

Nov23
Written by: Gary Bizek

When it comes to choosing builders for your project, it is highly recommended to look for LEED accredited builders. Such a builder will ensure that your building has environment-friendly design and structure....

November 23, 2017

Nov16
Written by: Gary Bizek

Renovating a commercial building can be a daunting task. It can bring with it many challenges. There are many things you can do to ensure that the remodeling project works smoothly. Getting professional help is an important step in this direction, but there is more to do....

November 16, 2017

Nov09
Written by: Gary Bizek

Exterior insulation finishing system (EIFS) has gained widespread popularity because it is highly energy efficient and offers high level of versatility in design. Whether you are constructing a new building or renovating your old building,...

November 9, 2017

Nov03
Written by: Gary Bizek

Using concrete in construction means you are contributing to the release of massive volumes of the greenhouse gas, carbon dioxide. There are many areas in your construction project where you can reduce carbon footprint....

November 3, 2017

Oct26
Written by: Gary Bizek

Here is a closer look at 10 popular sustainable building materials...

October 26, 2017

Oct19
Written by: Gary Bizek

Studies show that owning sustainable warehouse can have a positive impact on your business’ bottom line. There is a growing trend of investing in sustainable warehouse designing and it is paying off well....

October 19, 2017

net-zero-builders-calgary
Sep28
Written by: Gary Bizek

There is a growing trend among commercial and residential owners to choose net zero or near zero building design and construction. Zero energy buildings have better insulation, are air-tight and more energy efficient than ordinary buildings....

September 28, 2017

Constrion calgary
Sep21
Written by: Gary Bizek

According to the latest study, augmented reality and virtual reality are expected to become a staggering $80 billion market within the next decade. Its size in real estate...

September 21, 2017

Construction_calgary
Sep14
Written by: Gary Bizek

If you want to build a new restaurant or renovate your place, it is more important than ever to be creative. With the competition always growing in number and features, you cannot afford to stick to the age-old traditions in architecture and...

September 14, 2017

construction_calgary
Aug24
Written by: Gary Bizek

The digitisation of the construction industry has taken place very recently in the last few decades. Since the need was already there it has been able to accept and utilise these advances quite easily and effectively. In fact these technological advances have already...

August 24, 2017

Green_building_construction_calgary
Aug17
Written by: Gary Bizek

There is a lot of talk regarding the green building today. Construction projects when promoting their premises talk of the beneficial factors which make their building environment friendly and thus a “Green building”. But other than its direct and implicit word...

August 17, 2017

commercial contractor calgary
Aug10
Written by: Gary Bizek

Drones are the latest technology to hit the construction industry and are making its presence and utility felt in a number of ways. With skyscrapers dotting the landscape and construction companies hard-pressed to build skyscraperswhich are taller than the tallest, human safety...

August 10, 2017

Calgary commercial calgary
Jul28
Written by: Gary Bizek

There is a growing trend in both residential and commercial settings to use fire retardant paints. Such paint can be used in small building projects or even in elaborate projects such as industrial spaces and public buildings. You may want to comply with the building...

July 28, 2017

Condo management calgary
Jul20
Written by: Gary Bizek

A commercial contractor works on a wide range of projects, which can include corporate buildings, retail buildings, schools and much more. Usually, such a contractor will handle all aspects and stages of construction including design, permits, purchasing building supplies, and...

July 20, 2017

Jul13
Written by: Gary Bizek

Flooding is considered as the most destructive kind of natural disaster in many parts of the world. Climate change has been a key driving factor behind the increasing incidences and intensity of flooding in Canada and elsewhere. More builders are now focusing on using...

July 13, 2017

Jul06
Written by: Gary Bizek

New innovations in building materials are always taking place in different parts of the world. The speed with which new materials are being made is faster than at which they are embraced. Many new construction technologies are now available to consumers, but many...

July 6, 2017

Jun30
Written by: Gary Bizek

There is a lot of difference between a commercial and residential renovation projects. If you are planning a renovation of your commercial building, there are some key points to keep in mind. Features that Can be Saved When you renovate a commercial building,...

June 30, 2017

Jun22
Written by: Gary Bizek

Renovating a commercial building can be a daunting task that requires taking into account a wide range of factors. Even when you have a planning team to ensure that no loopholes are left in the renovation, make sure to keep the following points in mind....

June 22, 2017

Jun16
Written by: Gary Bizek

The construction industry is continuously undergoing changes and embracing new advances in technology. this helps not only in reducing costs and saving time for construction projects, but also in reducing environmental impact. Here are 5 energy efficient construction...

June 16, 2017

Jun08
Written by: Gary Bizek

Insulation is one of the most difficult things to work with in construction. It is something that doesn’t contribute to a building’s aesthetics. So you can take the liberty to use almost any material without concern how it looks. This advantage has helped contribute to...

June 8, 2017

Jun01
Written by: Gary Bizek

Prefabricated building construction systems are being used increasingly in all types of construction projects due to the numerous advantages they offer. It is being used more and more with mechanization and standardization, offering a series of advantages over other traditional methods....

June 1, 2017

May25
Written by: Gary Bizek

There is increasing application of metal and architectural panels in the construction industry for the different benefits of these building systems.  These panels can be installed vertically and horizontally and offer lots of design flexibility....

May 25, 2017

May18
Written by: Gary Bizek

There are many advantages of using pre-engineered metal building systems for your construction projects. Time-saving and cost-savings are the most important things that come to mind when you think of these systems. This guide explores the different reasons why these systems...

May 18, 2017

May04
Written by: Gary Bizek

What is the Importance of Fire Stopping Systems in Construction Projects? Fire safety is a crucial aspect in any type of building construction. Fire safety has become an important part in standard building regulation that should be checked during inspection....

May 4, 2017

Apr26
Written by: Gary Bizek

If you are going to construct something, it is important to satisfy the local rules and get the right permit. It will be best to do this at the earliest, as you don’t want to be building without a permit. The relevant rules can be different based on whether you are building a new facility...

April 26, 2017